Airplanes are folded in a matter of seconds, the main thing is that there is a notebook at hand from which you can pull out a sheet. The paper easily takes the shape that you give it and, at the same time, it is inherent in the rigidity that allows this shape to be fixed, so you can make paper airplanes without much effort.
Necessary
paper
Instructions
Step 1
You need to take a piece of paper and lay it so that the narrower side is in front of you. Next, fold the narrow corners that are on the opposite side of the corners in front of you at an angle of 45 ° so that they are close to each other.
Step 2
After you have completed these steps, bend the sheet across the border where the corners you completed earlier end. We continue to add the corners, but now the algorithm of actions will be slightly different. Now the corners need to be folded obliquely, while they should be located on the line of symmetry of the figure that turned out as a result of your actions.
Step 3
Then fold the corner formed in the center, as a result of which you should get a lock, inside which are the corners that were obtained in the previous step.
Step 4
Now the resulting figure needs to be folded in half, but so that its folds are outside.
Step 5
Further, in order to get the part of the wing carrying the plane through the air, bend the wings of the paper product on both sides of the sheet and place them so that they are located at an angle of 90 ° with respect to the body. Now the classic model of a paper airplane, the flight of which alternates with an alternating upward takeoff and a downward dive, is ready.
