For an overnight stay during a car trip or a tourist passage, putting together a tent in hiking conditions in just 1-2 minutes is what you need. And it is convenient and without unnecessary expenditure of energy. Therefore, before you go on an expedition or go on a long hike, arm yourself with information on how to assemble an automatic tent correctly.
Instructions
Step 1
Automatic tents are prized for their functionality, quality, comfort and ease of construction. All you need is to understand the assembly principle, and it is quite simple, thanks to which the automatic tent, even in the rain and in the dark, is easily assembled by one, even completely unprepared, person.
Step 2
Start assembling the tent from the top of the tent. The inner tent, awning and frame are all combined into a single whole. Installation of an automatic tent is carried out immediately with all the elements. Raise the center hub. You can see that all existing arcs are fixed to it. Now sequentially click on each of them locks with clamps.
Step 3
Next, zip up the floor of the inner tent. That, in fact, is all - the tent is assembled. The frame is attached to the outer awning from the inside. The whole secret lies in the mechanism for fixing the arches and fastening, which together with the tent makes up one whole, besides, the inner tent is also fixed to the awning. Therefore, by assembling the frame, you automatically assemble the tent itself.
Step 4
The folding duralumin frame allows quick installation of the tent, as well as its quick disassembly. Folding mechanism like an umbrella. In the disassembled, that is, the transport position, both the inner layer of the fabric and the outer awning remain fastened to the frame. If you go hiking in the hot summer season, then unfasten the inner layer, there is no need to take it with you. Now you can use the automatic tent as a single layer. By the way, it weighs much lighter in this case. There is a ventilation vent in the upper part of the tent. Place your belongings in the existing pockets on the walls. After spending the night, having gathered to continue the journey, fold the tent in the same way as you assembled it, only in the reverse order and put it in a cover. In a portable form, automatic tents fit into covers 1.5 m long and 30-35 cm in diameter.
